RLC-3 Version 1.64

The following things have changed since the last software 
version: 

- Found out that some DS1286 clock chips are too slow for the
  way the earlier versions of software accessed it.  Caused
  the time and/or date to read incorrectly.  This version
  adds a wait state to correct the problem.

You can find this file and the others described below on our 
internet ftp site.  The easiest way to access it is with a web 
browser through our homepage (http://www.link-comm.com/linkcomm).  
You can also access it directly by anonymous ftp at 
ftp.netins.net in directory showcase/linkcomm/rlc-club/v160.

readme.txt           This file.

EPROMS.ZIP           The files needed to burn this software version.
                     The card rom data (included) is identical to V1.45.
                     The voice eprom data (included) is identical to V1.41.

EPROMS.ZIP should contain the following files:

  RLC3CARD.BIN should be loaded with offset of 0 as a binary file and
  burned into a 27C512 EPROM for each of the cards.  It is the same as
  version 1.45.  Checksum = B249.

  PROM1.BIN and PROM2.BIN should be loaded as binary files with no
  offset and burned into 27C010 or 27C001 eproms for the motherboard.

  Socket #3 should be empty.

  RLC3_VCE.141 should be loaded as a binary file with no offset and
  burned into a 27C010 or 27C001 eprom.  It is only about 77K, so don't
  be concerned that the file size is different than PROM1 and PROM2.  It
  goes in socket 4 on the motherboard.  It is the same as V1.41.
  Checksum = 5DAC.

If you have any questions, please email, fax, or call me.

Steve Strobel
Link Communications, Inc.
steve@link-comm.com
http://www.link-comm.com/linkcomm/
(406) 482-7547 fax
(406) 482-7515