V1.41 contains the same fixes as V1.38 for the lockup problems that only seem to occur on some RLC-3s. When these problems occur, the voice synthesizer can cause transmitters to stay on the air and/or require a controller reset to regain control. V1.41 also contains a lot of new words for the voice synthesizer. These words came from the voice library from the RC-96/RC-85 controllers, which we purchased from Advanced Computer Controls. Because of the addition of the new words, the word numbers have changed. This means you will have to change how you program your IDs and other messages slightly. Please note that if you are upgrading from a version prior to V1.34, the timer numbers changed then. Please refer to the manual for those changes. A description of the files follows: README This file. EPROMS ZIP The new eprom files for the cards and motherboard. Also includes instructions for burning the roms. CONVWORD ZIP A table relating the old word numbers to the new ones in all three formats discussed below. Helpful if translating from an older version. MAN_UPDA ZIP Appendix B (the list of words) in all three formats discussed below. Should be all you need to update your manual from V1.34 (except the front page which is only posted in the complete manuals). MAN_ASC ZIP New manual in ASCII format. Has no formatting, but will work with any word processor or file viewer. MAN_WP51 ZIP New manual for WordPerfect for Windows 5.1/2. Will convert to Word for Windows, but some of the formatting gets messed up. MAN_WP60 ZIP New manual for WordPerfect for Windows 6.0. Does not convert to Word for Windows 6.0. CONVERT.BAS A quickbasic program written by Cole Cunningham to convert upload files from the old to the new word numbers. DISK14.ZIP A MS-Windows program written by Rege Colwell to convert upload files. It converts word numbers and timer numbers from pre-1.34 to 1.41.