RLC-3 Field Programming Sheets - Quick Reference Section

FLD_RLC3.ZIP  includes the following files:
     1.   fld3_180.pdf                is for RLC-3 version 1.80
     2.   README.1ST                  is this file - 

You may want to print one test page before printing this
document. Some printers can not print to the edge of the
paper, due to having margin limitations.

To check this, load the document into Adobe Reader 3.01
then click on FILE (or alt F) followed by clicking  on
PRINT (or alt P) and before clicking "OK" during the
printer routine, look for a section of the printer routine screen,
called  "Print Range" and select "Current Page"

If you experience a problem printing these sheets,
see if the below fix takes care of the problem.
 
When using Adobe Reader 3.01 click on FILE (or alt F)
then click on PRINT (or alt P) and before clicking "OK"
During the printer routine, look in the lower left hand
corner of the PRINTER ROUTINE SCREEN, there is a
small box beside the words       "Shrink to Fit"
click on this box and a check mark should appear.
I hope this takes care of the printer margin limitation 
trouble that you may have experienced.

I hope you find these five pages (if 8 of the 9 sheets are printed on the front and
rear on 4 pages) as useful as I have over the past few years.

Jimmie Lee Mangus, Jr.
A.R.S.   WB8YST
3813 Kanawha Avenue SE
Charleston, WV 24304-1543
email:   wb8yst@aol.com