RLC-2 V4.25 Software

* VERSION 4.25 CHANGES

1) FIXED THE LARGE DVR MESSAGE PLAYBACK ERROR THAT OCCURRED IN VERSION 4.24

2) ADDED NEW DTMF PRIORITY VARIABLE INTO COMMAND 115
	0 - NO PRIORITY
	1 - PORT 1 PRIORITY
	2 - PORT 2 PRIORITY
	3 - PORT 3 PRIORITY
	4 - AUTOPATCH, BOTH FORWARD AND REVERSE PRIORITY
	5 - CONTROL RECEIVER PRIORITY
***	6 - AUTOPATCH, ONLY WHEN THE REVERSE AUTOPATCH IS ACTIVE

*** ADDED DTMF PRIORITY ONLY WHEN THE REVERSE AUTOPATCH IS ACTIVE ***

		FORMAT:  115 P D OR UNKEY OR <ENTER>

You will have to reinitialize if upgrading from any previous version.

-------------------------------------------------------------------------

This directory should contain the following files:

readme             this file
eproms.zip         the files needed to burn your own V4.25 eproms
		   for the RLC-2 and RLC-2a.

    The newest manual can be found in the rlc2/manuals directory.

Notes:

  To install the update you need to unzip eproms.zip and burn two 27C512
  eproms, one with the voice data and one for the main program rom.
  After installing the new roms, power up the controller while holding
  down the initialization button on the circuit board.  This will set
  everything up for factory defaults.  You can then begin programming.
  You may not have to reinitialize the controller if you are upgrading
  from a relatively recent version (4.00 or later).

  eproms.zip contains:
    voice401.bin - Binary file for the voice rom
    rlc2a425.icm - RLC2a Binary file for main rom with Icom HF interface
    rlc2a425.kwd - RLC2a Binary file for main rom with Kenwood HF interface
    rlc2a425.yas - RLC2a Binary file for main rom with Yaesu HF interface
    rlc2_425.icm - RLC2 Binary file for main rom with Icom HF interface
    rlc2_425.kwd - RLC2 Binary file for main rom with Kenwood HF interface
    rlc2_425.yas - RLC2 Binary file for main rom with Yaesu HF interface

	Note:  if your controller serial number is 150 or later, it
	is an RLC-2a rather than a RLC-2.  There is no functional
	difference, but the software is slightly different.

PDF is Adobe's Portable Document Format.  This is a format that can be
viewed and/or printed from DOS, Windows, Macintosh, and Unix systems
using the appropriate version of Adobe's Acrobat Reader. Acrobat is
freely distributable;  you can download it from Adobe's ftp site.  If
you have difficulty with their site, let me know and we may be able to
post the reader ourselves.  You may be able to download the viewer
and/or manual files using your WWW browser. All of the applicable
addresses are listed below.

Our addresses:
  FTP:    ftp.netins.net in directory showcase/linkcomm
  Email:  anything@link-comm.com
    example:  allan@link-comm.com
  WWW:    http://www.link-comm.com/linkcomm

Adobe's addresses:
  FTP:    ftp.adobe.com in directory pub/adobe/Acrobat
  WWW:    http://www.adobe.com/

If you have any questions, please email, fax or call us.

Link Communications, Inc.
Email: info@link-comm.com
WWW: http://www.link-comm.com/linkcomm
Phone: (406) 482-7515
Fax: (406) 482-7547
Orders Only: (800) 610-4085