RLC-1 VERSION 2.08

1) FIXED THE DTMF COVER MUTE IN CONNECTED PORT

2) FIXED THE VOICE DELAY START COUNTER ON PORT 2

3) FIXED THE CW DELAY START TIMER ON PORT 2



			  RLC-1 VERSION 2.07

1) FIXED COMMAND 123, STOP ACCESS ON RECEIVER DROP, IF DTMF DIGITS ENTERED.

2) COMMAND 129, MACRO RECALL, CHANGED THE FOLLOWING
	- MACRO NUMBER READBACK NOW 2 DIGITS, NOT 3
	- MACRO COMMAND NUMBER READBACK NOW ALWAYS 3 DIGITS

3) COMMAND 213, SERIAL DTMF COMMAND NAME RECALL, CHANGED THE FOLLOWING
	- WILL PRINT A '-' AS A LEADING ZERO IF THE ZERO IS NOT PART OF THE
	  COMMAND NAME.  OLD: 000213 (NAME WAS ONLY 213)
			 NEW: ---213 (NAME STILL ONLY 213, LOOKS BETTER)

4) FIXED THE BUG WITH COMMAND 042 NOT SENDING CUSTOM BEEPS OUT PORT 2

5) FIXED THE CLOCK BUG THAT OCCURRED AT 8:00PM AND 9:00PM




			  RLC-1 VERSION 2.06

Fixes a crosspoint bug.

			  RLC-1 VERSION 2.05

1)  ADDED A DROP-OUT MESSAGE COUNTER.  THE COUNTER CAN BE SET FROM
    01 TO 99.  WHEN THE COUNTER IS SET TO 01 THE DROP-OUT MESSAGE
    WILL BE SENT EVERY TIME.  WHEN THE COUNTER IS SET TO 02 THEN THE
    DROP-OUT MESSAGE WILL BE SENT EVERY OTHER TIME, AN SO ON...

    COMMAND 069 PROGRAMS, AND RECALLS THE DROP-OUT TIMER COUNTER

    TO PROGRAM THE COUNTER
	<069> P TT
		WHERE P IS THE PORT NUMBER: 1 OR 2
		CC IS THE COUNTER NUMBER FROM 01..99

    TO RECALL THE COUNTER
	<069> P
		WHERE P IS THE PORT NUMBER: 1 OR 2

    ERRORS ASSOCIATED WITH THIS COMMAND
	ERROR 1: INVALID AMOUNT OF DATA.  MUST BE EITHER 1 OR 3 DIGITS
		 AFTER THE COMMAND NAME

	ERROR 2: INVALID PORT NUMBER.  MUST BE EITHER PORT 1 OR PORT 2

	ERROR 3: INVALID DATA COUNTER.	MUST BE BETWEEN 01 AND 99

** NOTE **
YOU CAN STILL DISABLE THE EVENT LIKE NORMAL USING COMMAND 065 (EVENT TABLE).
THIS COMMAND ONLY ALLOWS YOU TO CONTROL HOW MANY TIMES THE DROP-OUT TIMER IS
SENT.

DEFINITION: DROP-OUT EVENTS ARE ONLY SENT AFTER THE HANG TIMER RUNS OUT.  THIS
	    COMMAND DOES NOT CHANGE THAT.  THE DROP-OUT COUNTER IS DECREMENTED
	    EACH TIME A DROP-OUT EVENT IS REQUESTED.  IF THE DROP-OUT COUNTER
	    IS NOT ZERO, THE DROP-OUT EVENT IS SKIPPED.

2) FIXED THE CALIBRATION ON THE ANALOG TEMPERATURE SENSORS (FACEPLATE 06,07).


CONTACT:

Link Communications, Inc.
1035 Cerise Rd
Billings, MT 59101-7378

VOICE: 406-245-5002
FAX:   406-245-4889