RLC-Icom V1.23 Software

The only change made between V1.22 and V1.23 of the firmware is that 
V1.23 turns off  (does a '95' setup) when the frequency is entered on 
all modules except where the frequency data is intended.  For example, 
I am currently monitoring on 146.520 S.  I decide to go to 446.000 S.  
When I request the frequency, the RLC-ICM turns off the two meter 
module and turns on the UHF module.  You can still manually enable the 
two meter module with the '85' or '90' command.  This should make 
working with the RLC-ICM much, much easier.  It will also free-up several 
user timers.  Call for update pricing if you can't burn your own eprom.

This directory should contain the following files:

readme.txt         this file
eproms.zip         the files needed to burn your own eproms

Notes:

To install the update you need to unzip eproms.zip and burn a 27C512
eprom.  You will probably not have to reintialize your RLC-Icom after
changing software, as the memory map hasn't changed.

2-25-2003