RLC-Club Version 1.60

The RLC-Club is a new controller that is being released at the 
Dayton Hamvention.  V1.60 is the initial release.

You can find this file and the others described below on our 
internet ftp site.  The easiest way to access it is through a web 
browser and our homepage (http://www.link-comm.com/linkcomm).  
You can also access it directly by anonymous ftp at 
ftp.netins.net in directory showcase/linkcomm/rlc-club/v160.

readme.txt           This file.

club_win.zip         A programming interface that lets you set up 
                     the RLC-Club without even opening the 
                     manual.  It will be included with the RLC-
                     Club.  If not in this directory, it can be
                     found in the club_win directory.

clubdemo.zip         A DOS EXE program that imitates programming
                     the RLC-Club from the serial port.  You can 
                     try out most of the commands with it.  Of 
                     course, since the hardware isn't available, 
                     you won't be able to hear the synthesized 
                     voice.  

rlc_club.pdf         The complete manual including schematics in 
                     Adobe's PDF (Portable Document Format).  See 
                     our web page for a link to their site where 
                     you can download Acrobat, the free 
                     print/viewing program. 

rlc_club.txt         The manual in plain text format.  It is not
                     formatted for easy reading or printing, so
                     we recommend that you use the PDF version
                     (described above) if you can.

eprom.zip            The binary file needed to burn a new eprom.  
                     It requires a 27C040 eprom, 120ns or faster. 

If you have any questions, please email, fax, or call me.

Steve Strobel
Link Communications, Inc.
steve@link-comm.com
http://www.link-comm.com/linkcomm/
(406) 482-7547 fax
(406) 482-7515